Repository navigation
Nes Zapper Cable #19
Description
Documenting examples of each cable wiring (in case anyone needs to create additional nes ones, or build their understanding of how the system works). Ive included a few photos and original schematic (as drawn by charcole).
Note: cables themselves do not appear to include any passive components (ie resistors/ capacitors).
Activity
charcole commentedon Nov 23, 2020
Thanks Dekkit, this is great. To share some more details. They were made from NES controller extender cables. These are only wired for a joypad so I had to crack open the shells and move the Strobe/Data pins over to the other side of the socket (to become Photosensor/Trigger) then glue the shell back shut. Then the female connector was snipped off and the wires crimped in the right order into the RJ45 jack.
Looks like the diagram I showed you is wrong. The photosensor and 5V lines need to be switched (at the NES jack).
dekkit commentedon Nov 24, 2020
Thanks for confirming!
I did a nes zapper conversion a few years back from a famicom db15pin to nes socket and had to do the same! (pull the pins out and reconfigure a cheap nes extension cable).
Ill draw this up properly one day but combine your comments and pin info
http://nesdev.com/zapper_to_famicom.txt