This repository was archived by the owner on Mar 6, 2026. It is now read-only.
Repository navigation
This repository was archived by the owner on Mar 6, 2026. It is now read-only.
Adrenaline driver create curve If I set it in below 20% speed | AMD RX 5600 XT #53
Description
Fan Control: v199
GPU: RX 5600XT
Driver Version: 24.8.1
My GPU, does not have 0 rpm if I use advanced control in AMD Adrenaline
Here's the image in adrenaline if I set 20% as lowest point in Fan Control
Can Fan Control adjust to "Zero RPM Mode" if I set certain range like below 20%?
The image below is what to my mind, it should behave
if it under 20% in Fan Control it will create a curve in AMD Adrenaline
This is what actually happen
Here's the calibration result
Activity
[-]GPU Fans Goes Random RPM If I Set In below 20% Speed | AMD RX 5600 XT[/-][+]Adrenaline driver create curve If I set it in below 20% speed | AMD RX 5600 XT[/+]Rem0o commentedon Sep 2, 2024
If your GPU doesn't support it natively, no.
That's the GPU defaulting back to a stock curve because the command sent was not valid/out of range. Keep above 20%.