Skip to content

Network Configuration

Jump to bottom
Alex Nano edited this page Apr 15, 2015 · 7 revisions

Basic Network Configuration

We have found that using a network topology and subnet configuration similar to the configuration below works reliably: Networking_Example

Note: The SwissRanger is on a second network interface (NIC) card, allowing it to be on a separate subnet (this is done to conserve bandwidth on OPT LAN)

If you are working with OpenPTrack v2, use this wiki instead.

About OpenPTrack

How to build and run an OpenPTrack system:

  1. Overview
  2. Supported Hardware
  3. Installation
  1. Time Synchronization
  2. Pre-Calibration Configuration
  3. Intrinsic Calibration
  4. Camera Network Calibration
  5. Person Tracking
  6. Object Tracking
  7. World Coordinate Settings
  8. Tips and Tricks

Troubleshooting

Deployment Guide

  1. Tested Hardware
  2. Network Configuration
  3. Imager Mounting and Placement
  4. Calibration in Practice
  5. Quick Start Example
  6. Imager Settings
  7. Manual Ground Plane
  8. Calibration Refinement

How to use the tracking data

How to receive tracking data in:

Notes on contributing to OPT.

OpenPTrack Website

Clone this wiki locally